MC33170 |
RFQ for MC33170 Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| MC33170 | - | - | 01+ |
The MC33170 is a complete solution for drain modulated dualband GSM 900MHz and DCS1800MHz Power Amplifiers.
Thanks to its internal decoder, the MC33170 drastically simplifies the interface between the PAs and the baseband logic section, providing an immediate gain in part count but also in occupied copper area. The device is also ready for 1V platforms since it accepts logic high control signals down to 900mV@25.
A priority management system ensures the negative is present before authorizing the power modulation, giving the necessary ruggedness to the final design. This function can easily be disabled for PAs not requiring a negative bias.
The device is able to directly drive an external P or Nchannel with the possibility to linearize the overall response via the internal highperformance control amplifier and easily implement system gain.
Finally, an LDO delivers a stable voltage, usable for external biasing purposes.
Features |
| • 1V platform compatible: ON voltage = 900mV, OFF voltage = 300mV max• Priority management system prevents power modulation before negative bias establishes• High performance 4.5MHz gainbandwidth product operational amplifier• Drives N or Pchannel MOSFET• 2.5V lownoise LDO• Idle mode input for very low power consumption (standby mode) |
|
Rating |
Pin NO. |
Symbol |
Value MIN |
Value MAX |
Units |
| Band selection |
1 |
Vband |
0 |
5.5 |
V |
|
Tx Enable |
2 |
TxEn |
0 |
5.5 |
V |
| GSM-900 |
3 |
VGSM |
-5 |
5.5 |
V |
| DCS-1800 |
4 |
VDCS |
-5 |
5.5 |
V |
| PA Start-up |
5 |
Vstartup |
0 |
5.5 |
V |
| Vbat |
7 |
Vbat |
0 |
5.5 |
V |
| NINY |
9 |
V+ |
0 |
5.5 |
V |
